200W 24V LED Driver IP20 – Constant-Voltage LED Power SuppliesBrowse 200w 24v led driver ip20 at Empire of Light Sydney for compatible 24V DC LED strip lights and architectural linear lighting. Match the driver’s output voltage, available wattage and environmental protection to the complete lighting installation.Driver Selection and Technical GuidanceOutput type: 24V DC constant voltage for compatible productsRated power: 200W maximumApproximate rated output current: 8.33A at 24VCompatibility: Confirm the LED strip’s voltage and total connected loadProtection: IP20Dimming: Verify whether a separate compatible controller or dimming system is needed; the standard CERIAN drivers reviewed are non-dimmableHow Much Driver Power Do You Need?Multiply the LED strip’s watts per metre by the installed metres. For example, a 5m strip rated at 10W/m needs 50W of nominal strip power. Select a compatible driver with adequate spare capacity for installation conditions, temperature and cable losses. Do not exceed the driver’s rated output.IP Protection and InstallationIP20 drivers are intended for dry, protected indoor installations. Keep the power supply away from moisture and condensation. Check ventilation, mounting requirements, wire sizes and voltage drop, especially for longer strip runs. Fixed mains electrical work must be carried out by a licensed electrician.Related LED LightingExplore all LED drivers, LED strip lights, LED controllers and aluminium LED profiles to complete a compatible lighting system.