Description
CERIAN 12W/m RGB COB LED Strip – IP65, 24V DC, 10m Roll
The CERIAN 12W/m RGB COB LED strip provides a continuous-looking line of vibrant, colour-changing light. Its high-density chip-on-board design helps reduce visible LED dots and is suitable for colour-changing cove lighting, architectural accents, retail displays and decorative profiles. This version has a stated IP65 protection rating.
Technical Specifications
- LED technology: RGB COB
- Power: 12W per metre
- Voltage: 24V DC
- Light colour: RGB, colour changing
- Protection rating: IP65
- LED density: 756 LEDs per metre (as listed)
- Beam angle: 140°
- Roll length: 10 metres
- Construction: Flexible strip with silicone material
- Mounting: 3M adhesive backing and compatible aluminium profile, subject to the installation conditions
- Control: Compatible RGB controller required; verify wiring and controller compatibility
Where to Use This RGB COB Strip
Use it for colour-changing cove lighting, architectural accents, retail displays and decorative profiles. For a neat architectural finish, select a suitable aluminium profile and diffuser. Select a controller that supports the strip’s RGB connections and required operating voltage.
Protection and Installation
IP65 guidance: Dust-tight protection and resistance to water jets under specified test conditions; not suitable for immersion. Seal all cut ends and connections appropriately.
- Plan the run and check the manufacturer’s marked cut points, wiring diagram and maximum run length.
- Use a compatible 24V DC driver sized for the total connected load. Allow suitable headroom and consider voltage drop for longer runs.
- Fit a suitable aluminium profile for thermal management and protect connections for their environment.
- Have mains wiring installed by a licensed electrician; follow the manufacturer’s sealing and installation requirements.
Related LED Lighting Accessories
Browse RGB COB LED strips, LED controllers, LED drivers and aluminium LED profiles. Confirm compatibility before ordering.
CERIAN 12W/m RGB IP65 COB LED Strip – Buying Guide and FAQs
This CERIAN RGB COB LED strip is listed with RGB colour changing with a compatible controller. Check the specifications above for the correct roll length, operating voltage, power consumption and IP rating before installation.
Frequently Asked Questions
Which LED driver should I use?
Choose a constant-voltage LED driver matching the voltage on this product’s specification. Calculate the total load from watts per metre multiplied by installed metres and allow appropriate spare capacity.
Can I use this CERIAN strip outdoors?
IP65 provides protection against dust and water jets under test conditions, not immersion. Check sealing at connections and cut ends.
What accessories are recommended?
Use a suitable aluminium profile where required for heat management and appearance. For colour-changing effects, choose a compatible RGB controller. Consider cable sizing and voltage drop for longer runs.
Related CERIAN Lighting Products
Browse LED strip lights, LED drivers, aluminium profiles and LED controllers.
