Description
CERIAN 12W/m RGB COB LED Strip – IP67, 24V DC
The CERIAN 12W/m RGB COB LED strip provides a continuous-looking line of vibrant, colour-changing light. Its high-density chip-on-board design helps reduce visible LED dots and is suitable for colour-changing cove lighting, architectural accents, retail displays and decorative profiles. This version has a stated IP67 protection rating.
Technical Specifications
- LED technology: RGB COB
- Power: 12W per metre
- Voltage: 24V DC
- Light colour: RGB, colour changing
- Protection rating: IP67
- LED density: 736 LEDs per metre (as listed)
- Beam angle: 140°
- Strip width: 12mm
- Construction: Flexible strip with silicone material
- Mounting: 3M adhesive backing and compatible aluminium profile, subject to the installation conditions
- Control: Compatible RGB controller required; verify wiring and controller compatibility
Where to Use This RGB COB Strip
Use it for colour-changing cove lighting, architectural accents, retail displays and decorative profiles. For a neat architectural finish, select a suitable aluminium profile and diffuser. Select a controller that supports the strip’s RGB connections and required operating voltage.
Protection and Installation
IP67 guidance: Dust-tight protection and temporary immersion resistance under defined test conditions; not a claim of permanent underwater suitability. Check installation sealing requirements.
- Plan the run and check the manufacturer’s marked cut points, wiring diagram and maximum run length.
- Use a compatible 24V DC driver sized for the total connected load. Allow suitable headroom and consider voltage drop for longer runs.
- Fit a suitable aluminium profile for thermal management and protect connections for their environment.
- Have mains wiring installed by a licensed electrician; follow the manufacturer’s sealing and installation requirements.
Related LED Lighting Accessories
Browse RGB COB LED strips, LED controllers, LED drivers and aluminium LED profiles. Confirm compatibility before ordering.
CERIAN LED Strip – Product FAQs
How do I choose the right LED driver?
Match the voltage on the product specification and calculate total power from watts per metre multiplied by installed length, allowing suitable headroom.
What protection rating should I use?
The existing product description mentions IP67. Confirm the manufacturer’s rating and seal all cut ends and connectors appropriately for the installation.
What accessories are recommended?
Choose compatible controllers, connectors and an aluminium profile as appropriate. Plan additional power feeds for long runs to manage voltage drop.
Related CERIAN Products
See LED drivers, LED strip connectors and LED profiles.
