Description
CERIAN 20W COB LED Strip Light – 3500K | 24V DC, 5m Roll
The CERIAN 20W COB Flexi LED strip in 3500K delivers a smooth, continuous-looking line of light with high-density chip-on-board LEDs. Its 3500K colour temperature is suited to a balanced warm-neutral appearance for kitchen joinery, display shelving and comfortable task lighting. The flexible strip is designed for use with a suitable aluminium profile, helping create a clean finish for linear lighting projects.
Product Specifications
- Brand: CERIAN
- LED technology: COB (chip on board)
- Power: 20W per metre
- Supply: 24V DC constant voltage
- Colour temperature: 3500K
- Roll length: 5m
- Strip width: 10mm
- Beam angle: 140° (as stated in the product information)
- Colour rendering: CRI >90
- Luminous surface width: 4.0 ± 0.2mm
- Mounting: 3M adhesive backing; use with an aluminium profile
- Parent SKU: CE.5.STC24.20
- Protection: Bare-board indoor series
Where to Use 3500K COB LED Strip Lighting
Ideal for projects seeking a balanced warm-neutral appearance for kitchen joinery, display shelving and comfortable task lighting, subject to the fitting and installation requirements. The COB design minimises visible light spots and produces soft, uniform illumination. The strip uses a high-transmittance silicone material and is intended to be installed with an aluminium profile for thermal management.
Indoor use: This bare-board strip is intended for indoor decorative lighting; it is not described as water-resistant. For installations requiring IP65 protection, browse the 20W COB IP65 range.
Installation and Driver Selection
- Plan the run length and confirm the driver’s 24V DC output and sufficient wattage capacity for the installed length.
- Clean the mounting surface before installation and prepare the required aluminium profile.
- Cut only at the manufacturer’s marked cut points. Make any electrical connections using methods and accessories approved for the strip.
- Peel the adhesive backing gradually while positioning the strip. Avoid pressing directly on the LED emitting surface.
- For longer runs, follow the manufacturer’s guidance on voltage drop and power injection. Have mains electrical connections completed by a licensed electrician.
Related LED Strip Products and Accessories
Compare the 20W COB LED strip range, or browse 24V-compatible LED drivers, aluminium LED profiles and LED strip connectors. Check each accessory’s specifications for compatibility.
CERIAN 20W/m 3500K COB LED Strip – Buying Guide and FAQs
This CERIAN COB LED strip is listed with 3500K neutral-warm white. Check the specifications above for the correct roll length, operating voltage, power consumption and IP rating before installation.
Frequently Asked Questions
Which LED driver should I use?
Choose a constant-voltage LED driver matching the voltage on this product’s specification. Calculate the total load from watts per metre multiplied by installed metres and allow appropriate spare capacity.
Can I use this CERIAN strip outdoors?
Only use outdoors if the individual product’s verified IP rating and manufacturer’s instructions permit it. Do not assume an indoor strip is waterproof.
What accessories are recommended?
Use a suitable aluminium profile where required for heat management and appearance. For dimming, check compatible controllers and drivers. Consider cable sizing and voltage drop for longer runs.
Related CERIAN Lighting Products
Browse LED strip lights, LED drivers, aluminium profiles and LED controllers.
